Gorgeous New Crystal Jewelry Designs & Instructions!

Now is a perfect time make new jewelry designs for your Fall outfits and with the Holidays right around the corner, it’s time to get busy creating special gifts and eye catching beauties for your festive parties.

Swarovski’s beautiful New Fall and Winter Innovations, make it easy to create stunning jewelry that is both on trend, while providing a classic distinction that no other crystal can.

Here are a few gorgeous Swarovski Crystal jewelry designs and free instructions for your designing delight!

Free_Swarovski_Crystal_and_Pearl_Bracelet_Design_and_instructions_Shimmering_Velvet_Bracelet

Swarovski crystals Product Group Article No. Amount Size Color Color Code
Beads 5000 1 pc 8mm Light Colorado Topaz Shimmer 246 971
Fancy Stones 4470 4 pcs 10mm Light Colorado Topaz Shimmer 246 971
Crystal Pearls 5810 5 pcs 10mm Crystal Velvet Brown 001 951

Supplies:

4 10mm link settings “Almost Instant Jewelry” by Fire Mountain Gems #H20-3040MT

5” 20 gauge Gold Artistic Wire

1 lobster clasp

5 4mm jump rings

1 2” head pin

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Using the alcohol wipes clean each of the 10mm link settings. Using the two part epoxy, glue into each of the 10mm link settings the 4470 10mm light Colorado topaz shimmer cushion stones. Set aside to dry.

Step 2: Cut the 20 gauge wire into five 1” pieces. Using one piece of wire make a simple loop, slide on one 5810 10mm velvet brown pearl and make a simple loop. Repeat four more times and set aside.

Step 3: Using one head pin slide on one 5000 10mm light Colorado topaz shimmer bead and wire wrap to close. Set aside.

Step 4: To make bracelet: using one jump ring attach lobster clasp to one pearl component made in Step 2. Then attach to one cushion stone component made in Step 1. Repeat pattern 4 more times ending with a pearl component. Add on 4 jump rings in a chain and then add on the bead component made in Step 3.

Free_Swarovski_Crystal_and_Pearl_Bracelet_Design_and_instructions_Shimmering_Velvet

Simmering Velvert Earrings Free Design and Instructions using Swarovski Crystals

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Fancy Stones

4470

2 pcs

10mm

Light Colorado Topaz Shimmer F

246 971

Crystal Pearls

5810

2 pcs

10mm

Crystal Velvet Brown

001 951

Crystal Pearls

5810

2 pcs

5mm

Crystal Velvet Brown

001 951

Crystal Pearls

5810

2 pcs

3mm

Crystal Velvet Brown

001 951

Sew On

3230

2 pcs

12x7mm

Light Colorado Topaz Shimmer F

246 971

Supplies:

2 10mm link settings “Almost Instant Jewelry” by Fire Mountain Gems #H20-3040MT

4” 20 gauge Gold Artistic Wire

2 ear wires

2 1” head pin

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Using the alcohol wipes clean each of the 10mm link settings. Using the two part epoxy, glue into each of the 10mm link settings the 4470 10mm light Colorado topaz shimmer cushion stones. Set aside to dry.

Step 2: Cut the 20 gauge wire into four 1” pieces.

Step 3: Using one piece of wire make a simple loop, slide on one 5810 10mm velvet brown pearl and make a simple loop. Repeat once more time and set aside.

Step 4: Using one piece of wire make a simple loop, slide on one 5810 5mm velvet brown pearl and make a simple loop. Repeat once more time and set aside.

Step 5: Using one head pin, slide on one 5810 3mm velvet brown pearl and make a simple loop. Repeat once more time and set aside.

Step 6: To create earring: Starting with an ear wire attach to the 10mm pearl component made in Step 3, then attach to one cushion component made in Step 1, then attach one 5mm pearl component made in Step 4, then attach one 3230 12x7mm light Colorado topaz shimmer sew on, and finally one 3mm pearl component made in Step 3.

Free Swarovski Crystal Earring Design and Instructions

Free Swarovski Crystal Necklace Design and Instructions

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5000

20 pcs

8mm

Black Diamond Shimmer

215 971

Beads

5328

60 pcs

4mm

Black Diamond Shimmer

215 971

Beads

5328

30 pcs

6mm

Black Diamond Shimmer

215 971

Beads

5000

20 pcs

8mm

Light Colorado Topaz Shimmer

246 971

Beads

5328

60 pcs

4mm

Light Colorado Topaz Shimmer

246 971

Beads

5328

30 pcs

6mm

Light Colorado Topaz Shimmer

246 971

Beads

5328

60 pcs

4mm

Erinite Shimmer

360 971

Beads

5328

30 pcs

6mm

Erinite Shimmer

360 971

Pendants

6106

3 pcs

16mm

Black Diamond Shimmer

215 971

Rivoli

1122

1 pc

12mm

Light Colorado Topaz Shimmer F

246 971

Supplies:

1 Flora Toggle TierraCast® 94-6223-27

4¾” Flora Rings TierraCast® 94-3200-27

1 12mm Faceted Rivoli Link TierraCast® 94-3152-27

30 4mm oval jump rings

5 6mm round jump rings

12 2mm crimp beads

12 3mm crimp covers

72” beading wire

Swarovski crystal two-part epoxy glue

Alcohol wipes

Scotch tape

Instructions

Step 1: Using the alcohol wipes clean the Rivoli link. Using the two part epoxy glue in one 1122 12mm light Colorado topaz shimmer Rivoli into the link and set aside to dry for 24 hours.

Step 2: Cut the beading wire into six 12” pieces and set aside.

To Create Necklace Strands:

Step 3: Strand #1: Using one piece of wire slide on one crimp bead and one Flora Ring and crimp to close. Attach crimp cover. Slide on five 5328 4mm light Colorado topaz shimmer bicones, one 5000 8mm light Colorado topaz shimmer bead, three 5328 6mm light Colorado topaz shimmer bicones, and one 5000 8mm light Colorado topaz shimmer bead. Repeat this pattern 4 more times and end the strand with five 5328 4mm light Colorado topaz shimmer bicones. Close off the end with a piece of scotch tape.

Step 4: Strand #2: Using one piece of wire slide on one crimp bead and the same Flora Ring and crimp to close next to the first strand. Attach crimp cover. Slide on five 5328 4mm Erinite shimmer bicones and five 5328 6mm Erinite shimmer bicones. Repeat this pattern 4 more times and end the strand with five 5328 4mm Erinite shimmer bicones. Close off the end with a piece of scotch tape.

Step 5: Strand #3: Using one piece of wire slide on one crimp bead and the same Flora Ring and crimp to close next to the first strand. Attach crimp cover. Slide on five 5328 4mm black diamond shimmer bicones, one 5000 8mm black diamond shimmer bead, three 5328 6mm black diamond shimmer bicones, and one 5000 8mm black diamond shimmer bead. Repeat this pattern 4 more times and end the strand with five 5328 4mm black diamond shimmer bicones. Close off the end with a piece of scotch tape.

Step 6: Begin to make a tight braid with the three strands created in steps 3-5. When the braid is complete, slide on a crimp bead and one Flora Ring to one of the strands and crimp to close. Attach crimp cover. Repeat this step for the other two strands.

Step 7: Repeat Steps 3 – 6 to make other side of the necklace.

Step 8: Using 3 oval jump rings, attach them together to create a chain and then use this to attach one side of the Flora toggle to one of the Flora rings. Repeat this to attach the other side of the toggle.

Step 9: Using one round jump ring attach the Rivoli link made in Step 1 to the bottom Flora ring on the necklace. Using another round jump ring attach the bottom of the Rivoli link to another Flora Ring.

Step10: Using the oval jump rings make three chains with them. One with 4 rings, one with 8 rings, and one with 12 rings. On the bottom of each of these chains attach one 6106 16mm black diamond shimmer pendant. Using round jump rings, attach each chain to the bottom of the last Flora ring.

Free Swarovski Crystal Necklace Design and Instructions wholsale Crystal Beads

Hope you’re inspired by these beautiful designs.

Shine Extra Bright Sparkle Tribe!swarovski_authorized_reseller

At Rainbows of Light we only sell Genuine Swarovski Crystals Wholesale to the Public, offering you thousands of shapes, colors and sizes to choose from. We have no tax or surcharges and always provide Free U.S. Shipping on all orders over $100.00. This Guarantees you receive the best prices anywhere on all your favorite Swarovski Crystals!
We can order anything Swarovski makes within the components division – even if it’s not listed on our website rainbowsoflight.com. Please contact us for anything you’re interested in, as we are ALWAYS happy to help!
Harmony and Kashi
Keep Smiling & Keep Shining!
Happy Birthday Sheri
Advertisements

DIY Halloween Inspired Swarovski Crystal Jewelry Designs & Craft Projects!

Free_Swarovski_Crystal_Halloween_Projects_and_Jewelry_designs

Halloween is the perfect time to get creative and make something that will express your individual style. Whether you like spooky or fun, here are 11 new DIY Halloween jewelry designs and craft projects that are sure to put the glam in your All Hallows’ Eve!

Free_Swarovski_Crystal_Halloween_Necklace_Patter_Design_and_Instructions_Firey_Skull_Drop_Necklace

Free Swarovski Crystal Halloween Inspired Necklace Design and Instructions

Firery Skull Drop Necklace

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5750

3 pcs

19mm

Crystal Red Magma

001 REDM

Beads

5328

6 pcs

3mm

Jet

280

Sew On Stones

3254

8 pcs

20x9mm

Jet

280

Sew On Stones

3254

7 pcs

30x14mm

Jet

280

Supplies:

42 6mm black round jump rings

3 4mm black oval jump rings

3 24 gauge 2” headpins

1 Large Classic Hook TierraCast®

Instructions

Step 1: Using one head pin slide on one 3mm 5328 jet bead, one 5750 19mm crystal red magma skull bead and then one 5328 3mm jet bead. Wire wrap to close. Using one 4mm oval jump ring attach skull to 3254 30x14mm Diamond Leaf Sew On jet and set aside. Repeat this 2 more times.

Step 2: Attach together three 6mm jump rings to create a chain. Using last jump ring attach to one end of 3254 30x14mm Diamond Leaf Sew On jet. Add three 6mm jump rings to other end of sew on. Using last jump ring attach to one end of 3254 20x9mm Diamond Leaf Sew On stone. Repeat this process adding the diamond leaf sew on stones in the following order (lg, sm, sm, sm, sm, sm, sm, lg, sm, lg). Add 3 more jump rings and the large classic hook.

Step 3: Find the center of the necklace and using one 6mm jump ring attach one of the components from Step 1. Moving up two links to the right attach a second component and finally moving two links to the left of center add the third component.

Free Swarovski Crystal Halloween Inspired Bracelet Design and Instructions

Scary Charm Bangle

Free_Swarovski_Crystal_Halloween_Beacelet_Patter_Design_and_Instructions_Scarry_Charm_Bangle

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5750

1 pc

13mm

Crystal Golden Shadow

001 GSHA

Beads

5750

1 pc

13mm

Crystal Metallic Lt Gold 2X

001 MLG2

Beads

5328

2 pcs

6mm

Crystal Metallic Lt Gold 2X

001 MLG2

BeCharmed

80901

1 pc

12mm

Crystal Metallic Lt Gold

001 MLGLD

Pendants

6480

1 pc

18mm

Crystal Gold Patina

001 GOLPA

Rivolis

1122

1 pc

12mm

Crystal Black Patina F

001 BLAPA

Supplies:

1 Rivoli Frame TierraCast® 94-2366-27

1 Rose Skull TierraCast® 94-5685-27

1 Skull Charm TierraCast® 94-2455-27

1 12 gauge wire bracelet TierraCast® 01-0301-27

6 6mm jumprings

4 2” headpins

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Clean the Rivoli frame with the alcohol wipe. Using two part epoxy glue the Rivoli into the Rivoli frame and add a jump ring and set aside.

Step 2: Using a headpin slide on one crystal skull bead and make a simple loop and add a jump ring. Repeat for second skull bead and set aside.

Step 3: Using a headpin slide on one bicone, one BeCharmed bead and one bicone and make a simple loop and add a jump ring. Set aside.

Step 4: Using a headpin slide on brass Rose skull and make a simple loop and add a jump ring. Set aside.

Step 5: Add a jump ring to the spike pendant and set aside.

Step 6: Using all the components made in Steps 1-5 add to the wire bracelet in your favorite order.

Free Swarovski Crystal Halloween Inspired Wrap Bracelet Design and Instructions

Hurray for Orange and Black

Free Swarovski Crystal Pattern Hurray for Orange and Black Bracelet

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Crystal Pearls

5810

18 pcs

3mm

Crystal Neon Orange

001 733

Crystal Pearls

5810

36 pcs

4mm

Crystal Neon Orange

001 733

Crystal Pearls

5810

36 pcs

6mm

Crystal Neon Orange

001 733

Beads

5750

2 pcs

13mm

Jet

280

Beads

5328

10 pcs

6mm

Jet

280

Beads

5328

4 pcs

4mm

Jet

280

Pave Beads

86001

2 pcs

8mm

Jet

280

BeCharmed Beads

80901

2 pcs

12mm

Jet

280

Supplies:

2 2” headpins

3½ rings of memory wire

Instructions

Step 1: Using one head pin slide on one skull bead and make a simple loop. Repeat once and set aside.

Step 2: Using a round nose plier turn one end of the memory wire until you have a double turn.

Step 3: Onto the memory wire slide on one 5328 6mm jet bicone, {two 6mm pearls, two 4mm pearls, two 3mm pearls, two 4mm pearls, 6mm pearls, one 5328 6mm jet bicone, one BeCharmed bead, and one 5328 6mm jet bicone. Repeat the pearl section and add one Pave Ball, repeat the pearl section and add one 5328 4mm bicone, one 5238 6mm bicone and one 5328 6mm bicone. Repeat the pearl section and add one 5328 6mm bicone.} Repeat the entire pattern in brackets one more time to finish bracelet.

Step 4: Trim the memory wire to leave a 1” tail. Using the pliers turn the wire until it tightens to the last bead.

Step 5: Using the skulls from Step 1, add onto each of the loops on the bracelet to complete.

Free Swarovski Crystal Halloween Inspired Earring Design and Instructions

Skull Drops

Free_Swarovski_Crystal_Halloween_Beacelet_Patter_Design_and_Instructions_SSkull_Drops

Product Group

Article No.

Amount

Size

Color

Color Code

Crystal Pearls

5810

4 pcs

4mm

Crystal Neon Orange

001 733

Pave Beads

86001

2 pcs

8mm

Jet

280

CClick Here To Shop For All Swarovski Crystal Items

Supplies:

2 Scary Skull Buttons TierraCast® 94-6572-12

2 2” headpins

2 2” eye pins

2 ear wires

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Using one headpin slide on one pave ball and one pearl. Leaving ¼” of space on the headpin make a simple loop. Attach this to the bottom of the button shank where it will swing freely.

Step 2: Using one eye pin slide on one pearl. Leaving ¼” of space on the eye pin make a simple loop. Attach the ear wire to one end. Attach the other end of the eye pin to the top half of the button shank. Slide the pearl up to the top of the ear wire. Using the alcohol wipe clean the back of the button. Using a small drop of two-part epoxy placed on the back of the button above the shank to hold the eye pin in place. Set aside.

Step 3: Repeat Steps 1-2 for second earring.

Free Swarovski Crystal Halloween Inspired Necklace Design and Instructions

Witcheypoo Dropped In Charm Necklace

Free_Swarovski_Crystal_Halloween_Beacelet_Patter_Design_and_Instructions_Witcheypoo_Dropped_in_Charm_Necklace

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Crystal Pearls

5860

1 pc

10mm

Crystal Iridescent Green

001 930

Crystal Pearls

5840

2 pcs

8mm

Crystal Iridescent Green

001 930

Beads

5750

1 pc

13mm

Crystal Luminous Green

001 LUMG

Beads

5328

2 pcs

6mm

Jet

280

Beads

5328

1 pc

4mm

Jet

280

BeCharmed Beads

80401

1 pc

16mm

Jet

280

Supplies:

1 Witches Head lampwork bead

1 Witch Charm TierraCast® 94-2379-13

1 Bat Charm TierraCast® 94-2380-13

5 2” headpins

7 6mm jump rings

1 30” 2.4mm Ball chain with connector TierraCast® 20-1430-00

Instructions

Step 1: Using a headpin slide on one skull bead, make a simple loop and attach one jump ring. Set aside.

Step 2: Using a headpin slide on one 4mm jet bicone and witches lampwork bead, make a simple loop and attach one jump ring. Set aside.

Step 3: Using a headpin slide on one 6mm jet bicone, one BeCharmed Spike Bead and one 6mm jet bicone, make a simple loop and attach one jump ring. Set aside.

Step 4: Using a headpin slide on two baroque pearls, make a simple loop, and attach one jump ring. Set aside.

Step 5: Using a headpin slide on one coin pearl, make a simple loop, and attach one jump ring. Set aside.

Step 6: Attach a jump ring to each of the TierraCast charms. Set aside.

Step 7: Using all the components made in Steps 1-6 and slide them onto the ball chain in your favorite order.

Free Swarovski Crystal Halloween Inspired Earring Design and Instructions

Day of the Dead Chandelier Earrings

Free_Swarovski_Crystal_Halloween_Beacelet_Patter_Design_and_Instructions_Day_of_the_Dead_Chandelier_Earrings

Click Here To Shop For All Swarovski Crystal Items

Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5328

10 pcs

4mm

Crystal Astral Pink

001 API

Beads

5052

4 pcs

6mm

Jet

280

Supplies:

1 Sugar Skull Charm TierraCast® 94-2320-26

1 Coffin Charm TierraCast® 94-2323-26

2 Dancing Senor Charm TierraCast® 94-2316-26

2 Dancing Senorita TierraCast® 94-2317-26

6 Bone Links TierraCast® 94-3130-26

2 6-Hole End Bar Link TierraCast® 94-3169-26

2 ear wires

6 2” eye pins

8 4mm round jump rings

Instructions

Step 1: Using an eye pin attach one of the Senorita charms, slide on one 5052 6mm jet bead and make a simple loop. Attach loop to one of a bone link. Repeat once and set aside.

Step 2: Using an eye pin attach one of the Senor charms, slide on one 5052 6mm jet bead and make a simple loop. Attach loop to one of a bone link. Repeat once and set aside.

Step 3: Using an eye pin attach one Coffin charm, slide on four 5328 4mm crystal astral pink bicones and make a simple loop. Attach loop to one of a bone link. Set aside.

Step 4: Using an eye pin attach one Sugar Skull charm, slide on six 5328 4mm crystal astral pink bicones and make a simple loop. Attach loop to one of a bone link. Set aside.

Step 5: To make first earring use the 6-hole bar. In the first hole use a jump ring and add one component from Step 1. In the sixth hole use a jump ring and add one component from Step 2. Using two jump rings attach them both to the component from Step 3, then attach one ring to hole 3 and the other to hole 4. Now attach an ear wire to the top of the bar.

Step 6: To make second earring use the 6-hole bar. In the first hole use a jump ring and add one component from Step 1. In the sixth hole use a jump ring and add one component from Step 2. Using two jump rings attach them both to the component from Step 4, then attach one ring to hole 3 and the other to hole 4. Now attach an ear wire to the top of the bar.

Free Swarovski Crystal Halloween Inspired Ring Design and Instructions

Skull Ring 

Free_Swarovski_Crystal_Halloween_Ring_Patter_Design_and_Instructions_Skull_Ring

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Flat back No Hot Fix

2856

1 pc

18x14mm

Crystal Light Chrome F

001 LTCH

Supplies:

1 Flat top Ring base

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Using the alcohol wipe, clean the ring base.

Step 2: Mix the two part epoxy and glue the skull flat back to the ring base. Set aside to dry for at least 24 hours.

Free Swarovski Crystal Halloween Inspired Luminary Design and Instructions

Jack the Luminary

Free_Swarovski_Crystal_Halloween_Patter_Design_and_Instructions_Jack_the_Luminaria

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5328

100 pcs

4mm

Jet

280

Beads

5328

22 pcs

4mm

Tangerine

259

Beads

5328

20 pcs

4mm

White Alabaster

281

Beads

5328

20 pcs

4mm

Sunflower

292

Supplies:

2 Candy Corn lampwork beads

2 2” headpins

2 6mm round jumprings

1 3” black ball chain with end connector

1 5” black ball chain with end connector

50” 24 gauge black artistic wire

1 metal Jack O’Lantern luminary

Instructions

Step 1: Using one headpin slide on one candy corn bead and one 5328 4mm tangerine bead and make a simple loop. Make a simple loop and add a jump ring. Repeat once and set aside.

Step 2: Using the 24 gauge wire attach it to one end of the metal handle. Begin sliding one the beads in the following order: five 5328 4mm jet beads, one 5328 4mm sunflower bead, one 5328 4mm tangerine bead, and one 5328 4mm white alabaster. Repeat this pattern 4 more times. At this point begin to twist the wired bead string around the handle on the luminary. Add more beads and continue twisting around handle until you reach the opposite side. Wire wrap to the luminary.

Step 3: Using the ball chains, slide on one of the candy corn components made in Step 1 to each of the chains. Hang the chains onto one side of the luminary.

Free Swarovski Crystal Halloween Inspired Trick or Treat Bag

Design and Instructions

Sparkly Trick or Treat Bag

Free_Swarovski_Crystal_Halloween_Patter_Design_and_Instructions_Sparkley_Trick_or_treat_Bag

Click Here To Shop For All Swarovski Crystal Items

Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5328

50 pcs

3mm

Jet

280

Beads

5328

55 pcs

4mm

Jet

280

Beads

5328

6 pcs

4mm

Crystal Astral Pink

001 API

Beads

5328

7 pcs

6mm

Crystal Astral Pink

001 API

Beads

5000

6 pcs

6mm

Crystal Astral Pink

001 API

Pendants

6480

6 pcs

18mm

Jet

280

Supplies:

1 Scary Cat Charm TierraCast® 94-2376-12

1 Zombie Charm TierraCast® 94-2382-12

1 Ghost Charm TierraCast® 94-2377-12

1 Bat Charm TierraCast® 94-2380-12

1 Grave Stone Charm TierraCast® 94-2381-12

1 Owl Charm TierraCast® 94-2383-12

1 Jack O’Lantern Charm TierraCast® 94-2378-12

13 2” Eye pins

6 6mm jumprings

20” #6 Fireline

1 felted Jack O’Lantern Trick or Treat bag

1 beading needle

Instructions

Step 1: Using one eye pin slide on one 5328 4mm jet bead, one 5328 6mm crystal astral pink, and one 5328 4mm jet bead. Make a simple loop to close. Add one Halloween charm on the end. Repeat six more times using a different charm each time. Set aside.

Step 2: Using one eye pin slide on one 5328 3mm jet bead, one 5328 4mm crystal astral pink, one 5328 4mm jet bead, one 5000 6mm crystal astral pink, and one 5328 4mm jet bead. Make a simple loop to close. Using a jump ring attach one 6480 18mm jet spike pendant to the small end of the beaded eye pin. Repeat five more times. Set aside.

Step 3: To create the fringe on the top of the bag sew down one end of the Fireline. Then begin to slide on one 5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one charm drop made in Step 1. At this point make a stitch into the felt bag to tack down the fringe. Now slide on one 5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one spike drop made in Step 2. At this point make a stitch into the felt bag to tack down the fringe. Repeat this entire pattern 6 more times until all the charm and spike drops are attached. Sew down the end of the fringe to complete.

Free Swarovski Crystal Halloween Inspired Tea Towel Design and Instructions

Haunted Mansion Tea Towel

Free_Swarovski_Crystal_Patter_Design_and_Instructions_Haunted_Mansion_Tea_Towel

Click Here To Shop For All Swarovski Crystal Items

Product Group

Article No.

Amount

Size

Color

Color Code

Flatback Hot Fix

2856

7 pc

10×7.5mm

Crystal Light Chrome M HF

001 LTCH

Flatback Hot Fix

2856

3 pc

14×10.5mm

Crystal Light Chrome M HF

001 LTCH

Flatback Hot Fix

2856

1 pc

18x14mm

Crystal Light Chrome M HF

001 LTCH

Flatback Hot Fix

2078

30 pcs

Ss12

Crystal Light Chrome M HF

001 LTCH

Flatback Hot Fix

2078

30 pcs

Ss20

Tangerine

259

Supplies:

Tea Towel (or kitchen towel) with Halloween Design

Iron

1 sheet of Teflon

Instructions

Step 1: Using the Hotfix crystals from the supply list, create a pattern of your choice to highlight the design on the towel.

Step 2: Turn on iron to hottest setting, no steam, (there should be no water in the iron). Place the Teflon sheet gently over the crystals (in order not to move them) and press firmly with the iron to adhere. Do not move the iron back and forth or the crystals will move out of place.

Note: You can also use a hotfix applicator tool to set each crystal individually or use a piece of transfer tape over the crystals to hold them in place. Then place Teflon over tape and iron.

Free Swarovski Crystal Halloween Inspired Drink Proctor Design and Instructions

Halloween Spider Drink Protector

Free_Swarovski_Crystal_Halloween_Spider_Drink_Protector_Design_and_Instructions

Click Here To Shop For All Swarovski Crystal Items

Swarovski crystals Product Group

Article No.

Amount

Size

Color

Color Code

Beads

5328

160 pcs

3mm

Crystal Light Chrome

001 LTCH

Beads

5328

1 pc

4mm

Jet

280

Beads

5050

1 pc

22x16mm

Jet

280

Beads

5728

1 pc

12mm

Crystal Metallic Sunshine

001 METSH

Pave Balls

86001

1 pc

10mm

Jet

280

Supplies:

40” 20 gauge black artistic wire

24” 20 gauge orange artistic wire

1 Spider Coffee Mug

1 2” black head pin

Instructions

Step 1: To make the legs of the spider. Cut the black wire into eight 5” pieces. At one end of the wire (using a round nose plier) twist the wire around twice to create a small curl. Slide on twenty 5328 3mm crystal light chrome bicones and set aside. Repeat 7 more times and set aside.

Step 2: To make the body of the spider, use the head pin and slide on one 5328 4mm jet bicone and one 5050 22mm jet oval bead. Now begin wiring each leg (left, then right, then left) to the headpin right above the oval bead. Trim off excess wire with each leg attached. After the 8th leg is attached slide on the jet Pave Ball and push down to make leg wraps secure. Now with the round nose pliers turn the end of the headpin twice to make the hole spider secure.

Step 3: To create the web creatively wrap the orange wire around the handle of the cup and weave back and forth to make a web. Then attach the right front leg and back left leg of the spider to the web. Finally attach a piece of wire to the scarab bead and attach the bead to the web.

Shine Extra Bright this Halloween Sparkle Tribe!swarovski_authorized_reseller

At Rainbows of Light we only sell Genuine Swarovski Crystals Wholesale to the Public, offering you thousands of shapes, colors and sizes to choose from. We have no tax or surcharges and always provide Free U.S. Shipping on all orders over $100.00. This Guarantees you receive the best prices anywhere on all your favorite Swarovski Crystals!
We can order anything Swarovski makes within the components division – even if it’s not listed on our website rainbowsoflight.com. Please contact us for anything you’re interested in, as we are ALWAYS happy to help!
Harmony and Kashi
Keep Smiling & Keep Shining!
Happy Birthday Sheri

Enjoy Summer Before Fall Arrives & It’s Pumpkin Ev-e-ry-thing!

heart_Shapped_Glasses_beach

(photo by http://vilanianinaut.tumblr.com/)

I know it can be tempting to jump the gun on, well, just about every holiday or upcoming season…I know Fall is just around the corner and I’m certainly as excited it as y’all are…cozy sweaters, stunning foliage and pumpkin ev-e-ry-thing…. but wait…let’s pump the brakes for just a sec!

Fall and all of its delicious and natural gorgeousness will be here before we know it, so let’s take the time to enjoy the last bit of summer time fun while we can!

I’m more of a “be here now” – try and enjoy the moment – type of gal…so in an attempt to hold onto every last precious moment of summer and all it’s glory, here are some color inspirations and jewelry designs that we can admire, make and wear before it’s too late!

Last week we had a surge in demand & popularity for the beautiful Swarovski Crystal 6731 Sea Snail Pendant. They are available in many colors and are quite unique.

Swarovski_6731-Blush_Rose-Sea_Snail_Pendants

The Swarovski Crystal 6731-14mm Sea Snail Pendant in Blush Rose are perfect to use when wanting to make quick and easy earrings or a dainty pendant.

Swarovski_Crystal_Sea_Snail_Earrings_Blush_Rose

(Swarovski Sea Snail Earrings Designed by Crystalynstudio)

These Swarovski Crystal Pearl and Sea Snail earrings are a simple and elegant design inspiration. The Rosaline Swarovski Pearls were used here, but you can also use the 5810 Swarovski Pearls in Powdered Rose for an excellent match.

5810-PR     Swarovski_Crystal_Pearls_5810_Rosaline_Wholesale_Beads

             Swarovski Powdered Rose Pearls                                    Swarovski Rosaline Pearls

Swarovski_6731-Crystal_Blue_Shade-Sea_Snail_Pendants     Swarovski_6731_Crystal_Bermuda_Blue_Sea_Snail_Pendants

                 Swarovski Crystal Blue Shade                                Swarovski Crystal Bermuda Blue

Free_Swarovski_Crystal_Design_Indeas_and_Instructions_Wholesale_Beads

Free Swarovski Crystal “Under the Sea” bracelet Design & Instructions

This stunning ocean and sea life inspired Crystal Bermuda Blue Bracelet highlights the unique 6730 Radiolarian Pendants, 6731 Sea Snail Pendants and 1695 Sea Urchin Round Stone.

free_DIY_Swarovski_Crystal_Jewelry_Designs

Free Swarovski Crystal “Under the Sea” Earring Design and Instructions

Free_Swarovski_Crystal_Necklace_Design_and_Instructions_Wholesale_Beads

Free Swarovski Crystal Ocean Inspired Necklace Design and Instructions

swarovski-color-and-jewelry-trends-spring-summer-2017

Céline Cousteau, the granddaughter of the ocean explorer Jacques Yves Cousteau, created an intriguing line of ocean inspired Swarovski Crystal Pendants, Flatbacks and Round Stones for us to design with and wear.

Find out more about Color, Jewelry Trends and Style Inspirations ~ Focusing on the Progressive Trend: WATER

Swarovski_6731_Crystal_AB_Sea_Snail_Pendants

Swarovski Crystal 6731 Sea Snail Pendant in Crystal AB

Crystal AB is one of the all time most popular colors, with yellows, pinks and blues shining through, it’s one of the most sparkly crystal you will find.

Hope this ocean inspired, beachy theme keeps your enthusiasm fro creating beautiful jewelry buoyant!

Shine Bright Sparkle Tribe!swarovski_authorized_reseller

At Rainbows of Light we only sell Genuine Swarovski Crystals Wholesale to the Public, offering you thousands of shapes, colors and sizes to choose from. We have no tax or surcharges and always provide Free U.S. Shipping on all orders over $100.00. This Guarantees you receive the best prices anywhere on all your favorite Swarovski Crystals!
We can order anything Swarovski makes within the components division – even if it’s not listed on our website rainbowsoflight.com. Please contact us for anything you’re interested in, as we are ALWAYS happy to help!
Harmony and Kashi
Keep Smiling & Keep Shining!

Happy Birthday Sheri

Free Crystal “Summer Blue”Necklace Design & Instructions

Free Swarovski Crystal Necklace Design and Instructions

Free Swarovski Crystal Necklace Design and Instructions

Create this look: high-tech meets Modernist

This new Swarovski Crystal Necklace design inspiration has very unique embellishments, Crystals on top of Crystals; now that’s a unique concept! This pendant necklace fuses new Shiny LacquerPRO Fancy Stones onto the Square Fancy Stones, creating a design that fuses nature-tech hues with a futuristic glam.

Asymmetric and graphic, Summer Blue will give an artistic edge to any outfit, whether you’re dressed up or dressed down.

Free Swarovski Crystal Necklace Design and Instructions and inspiration

SWAROVSKI Crystals Used in this Free Jewelry Design Project

Article Product Group Article No. Amount Size Color Color Code Fancy Stones

Swarovski Crystal 4139 2pcs. 14mm Crystal 001 Fancy Stones

Swarovski Crystal 4320 1pc. 14x10mm Azure Blue 001 L112S Fancy Stones

Swarovski Crystal 4320 1pc. 14x10mm Peony Pink 001 L113S Fancy Stones

Swarovski Crystal 4320 1pc. 14x10mm Summer Blue 001 L114S Fancy Stones

Swarovski Crystal 4439 6pcs. 14mm Crystal 001 Fancy Stones

Swarovski Crystal 4439 5pcs. 20mm Crystal 001 Fancy Stones

Swarovski Crystal 4470 1pc. 10mm Azure Blue 001 L112S Fancy Stones

Swarovski Crystal 4470 2pcs. 10mm Light Coral 001 L116S Fancy Stones

Swarovski Crystal 4470 2pcs. 10mm Mint Green 001 L115S Fancy Stones

Swarovski Crystal 4470 2pcs. 10mm Peony Pink 001 L113S Fancy Stones

Swarovski Crystal 4470 1pc. 10mm Summer Blue 001 L114S

Supplies and Tools

Supplies

Chain, silver, 80cm

2x Jump rings, silver, 4mm

1x Jump ring, silver, 6mm

1x Jump ring, silver, 8mm

1x Lobster clasp, silver

UV Glue

Tools

Flat nose pliers

Side cutter

Toothpick

UV glue lamp

Free Swarovski Crystal Necklace Design and Instructions step 1

Free Swarovski Crystal Necklace Design and Instructions step 2

Free Swarovski Crystal Necklace Design and Instructions step 3

Free Swarovski Crystal Necklace Design and Instructions and inspiration

STEP 1: Arrange Swarovski Fancy Stones art.4320 and 4470 with back side up as shown. Apply the UV glue onto the Swarovski Fancy Stone art.4439 and place it on top of the arranged Fancy Stones. Activate glue with a UV light to fix them firmly. Repeat this step 6 more times as shown in our illustrations with this step.

STEP 2: Glue and attach all the pieces together using the UV glue and light.

STEP 3: Cut an 80cm long chain. Attach it to the piece prepared in the previous steps using an 8mm jump ring as shown. Attach one end of the chain to a lobster clasp using a 4mm jump ring and attach the other end of the chain to a 6mm jump ring with a 4mm jump rings.

swarovski_authorized_reseller

At Rainbows of Light we only sell Genuine Swarovski Crystals Wholesale to the Public, offering you thousands of shapes, colors and sizes to choose from. We have no tax or surcharges and always provide Free U.S. Shipping on all orders over $100.00. This Guarantees you receive the best prices anywhere on all your favorite Swarovski Crystals!
We can order anything Swarovski makes within the components division – even if it’s not listed on our website rainbowsoflight.com. Please contact us for anything you’re interested in, as we are ALWAYS happy to help!
Harmony and Kashi
Keep Smiling & Keep Shining!
Swarovski_5741-Crystal_Paradise_Shine

Create These “Groovy Skulls” Earrings ~ DIY Design and Instructions!

free-diy-swarovski-crystal-skull-earrings-halloween-earring-inspiration-and-instructions

Free DIY “Groovy Skulls” Earring Design and Instructions

It’s Halloween time, so dress for divine darkness with the mysterious Swarovski Sparkling Skulls earrings. This charismatic combination of Crystal Pearls and Crystal Skull Beads in Crystal Silver Night 2X will make you the belle of the monster ball!

These easy to make Swarovski Crystal Skull and Pearl Hoop earrings are a fun design to create and wear, especially around this spooky time of year! This DIY earring design and project combines many deep Black, Hematite and Iridescent coatings that perfectly represent the Halloween mood. The front and center Swarovski Crystal Skull Bead captivates your attention, that emphasizes high precision faceting in a 3D look, creating detailed drama and mystery.

Although these Skull earrings are ideal for celebrating Halloween, they also pair well with the edgy jewelry fashion trend, accentuating a dark, rock glam style!

See the Step by Step Directions below in picture and written form.

free-diy-swarovski-crystal-skull-earrings-halloween-earring-design-inspiration-and-instructions

Swarovski Crystal Beads & Pearls Used to Make these Skull Earrings

Swarovski Crystal Skull Beads 5750-13mm Crystal Silver Night 2X – 2 pieces

(or choose from your favorite colored Skull Beads)

Swarovski Crystal Pearls 5810-3mm Dark Grey Pearl – 6 pieces

Swarovski Crystal Pearls 5810-3mm Crystal Iridescent Purple Pearl – 4 pieces

Swarovski Crystal Pearls 5810-3mm Mystic Black Pearl – 16 pieces

Swarovski Crystal Pearls 5810-4mm Dark Grey Pearl – 10 pieces

Swarovski Crystal Pearls 5810-4mm Crystal Iridescent Purple Pearl – 6 pieces

Swarovski Crystal Pearls 5810-4mm Mystic Black Pearl – 34 pieces

Swarovski Crystal Pearls 5810-5mm Dark Grey Pearl – 4 pieces

Swarovski Crystal Pearls 5810-5mm Mystic Black Pearl – 4 pieces

Swarovski Crystal Pearls 5810-6mm Crystal Iridescent Purple Pearl – 2 pieces

Swarovski Crystal Pearls 5810-6mm Mystic Black Pearl – 4 pieces

Supplies

2 Silver Ear posts

2 , 4mm Silver Jump rings

Two part adhesive glue

Wire silver, 0.8 mm, 60 cm

Tools

Drinking glass,

6 cm Flat nose pliers

Round nose pliers

Ruler

Side cutter

Toothpick

free-diy-swarovski-crystal-skull-earrings-halloween-earring-design-inspiration-and-instructions-from-rainbows-of-light

free-diy-swarovski-crystal-skull-earrings-halloween-earring-design-inspiration-and-instructions-from-rainbows-of-light-step-2

free-diy-swarovski-crystal-skull-earrings-halloween-earring-design-inspiration-and-instructions-from-rainbows-of-light-step-3

free-diy-swarovski-crystal-skull-earrings-halloween-earring-design-inspiration-and-instructions-from-rainbows-of-light-step-4

free-diy-swarovski-crystal-skull-earrings-halloween-earring-design-inspiration-and-instructions-from-rainbows-of-light-step-5

STEP 1: Cut a 60 cm long wire and make a loop at one of the ends of the wire. Form the wire into a circle shape using a drinking glass that is approximately 6cm.

STEP 2: Turn the loop formed on the wire to a 90˚ angle. Start inserting the Swarovski crystals from the material list onto the wire. After you insert the Swarovski Bead art. 5750 Crystal Silver Night 2x, place some glue underneath the bead using a toothpick and let it dry for 2 hours. Proceed with the remaining Swarovski crystals as shown.

STEP 3: Insert the other end of the wire through the loop and turn a loop on this end as well.

STEP 4: Attach the ear post to the top loop of the earring using a 4 mm jump ring. Repeat steps 1–4 to make the second earring.

swarovski_crystal_heart_beads_5741-crystal_silver_night

swarovski_authorized_reseller

We are an Authorized Reseller of Swarovski Crystals

At Rainbows of Light we only sell Genuine Swarovski Crystals Wholesale to the Public, offering you thousands of shapes, colors and sizes to choose from. We have no tax or surcharges and always provide Free U.S. Shipping on all orders over $100.00. This Guarantees you receive the best prices anywhere on all your favorite Swarovski Crystals!
We can order anything Swarovski makes within the components division – even if it’s not listed on our website rainbowsoflight.com. Please contact us for anything you’re interested in, as we are ALWAYS happy to help!
Harmony and Kashi
Keep Smiling & Keep Shining!
Harmony and Wonder Girl, Kashi

DIY This Stylish Mosaic Bangle Featuring the New Swarovski Triangle Flatbacks!

free-diy-swarovski-crystal-bangle-bracelet-design-and-instructions-how-to-apply-crystals-to-a-silver-bangle-bracelet-rainbows-of-light

Free DIY Swarovski Crystal “Mosaic Tile Bangle” Design and Instructions

This sparkling Swarovski Crystal bangle features Rhinestones from the new Fall/Winter 2017-18 Triangle Flatback Family. The New Swarovski Crystal Triangle Flat backs are available in the styles 2738 Alpha, 2739 Beta and 2740 Gamma.

These new Swarovski Triangle Flatback additions are ideal for creating geometric patterns that fit seamlessly together. Geometric shapes and repeating patterns are a very popular trend for jewelry and fashion lovers. They are lead free and lightweight, which is especially nice when applying them to clothing. Whatever your craft or jewelry project may be, these new Triangle Crystals will give

free-diy-swarovski-crystal-bangle-bracelet-design-and-instructions-how-to-apply-crystals-to-a-silver-bangle

Swarovski crystals

Product Group Article No. Amount Size Color Color Code
Alpha Flat Backs 2738 9 pcs 12x6mm Crystal F 001
Beta Flat Backs 2739 9 pcs 7×6.5mm Crystal Silver Night 001 SINI
Gamma Flat Backs 2740 9 pcs 10x10mm Crystal Silver Night 001 SINI

Supplies:

1 ½” Bangle

Two Part Epoxy Glue (my favorite to work with is E6000 – it dries clear and is available at any craft or hard wear store)

Alcohol wipes

free-diy-swarovski-crystal-bangle-bracelet-design-and-instructions-how-to-apply-crystals-to-a-silver-bangle-bracelet

Instructions

Step 1:       Clean the bangle with alcohol wipes.

Step 2:       Find the center of the bangle and place a drop of glue in 3 places to create the first mosaic tile.  Using one each of the triangle flat backs to create a mosaic square.  Continue to create squares to the right and left side of the bangle until covered completely.

I know these are pretty simple instructions, but there’s not much to it. You can play around with your favorite color combinations and pattern to create your own desired look.

free-diy-swarovski-crystal-bangle-bracelet-design-and-instructions-how-to-apply-crystals-to-a-silver-bangle-bracelet-rainbows-of-light-com-2

Hope you like this both stylish and easy DIY Swarovski Crystal design.

swarovski_authorized_reseller

Rainbows of Light has been a wholesale dealer for over 35 years. We are officially an Authorized Reseller of SWAROVSKI Crystals, ensuring you that you are receiving genuine Swarovski Crystals at the best wholesale prices around! 

Please contact me with any questions, as I am always more than happy to help!

Harmony and Kashi

Keep Smiling and Keep Shining!

Swarovski Crystal Rocks

DIY Multi-Strand Bracelet Highlighting Peacock Colors Using the New Crystal Rainbow Dark Effect

free-diy-swarovski-crystal-rainbow-dark-bracelet-design-and-instructions

Free Crystal DIY Multi-Strand Bracelet Featuring the New Fall/Winter Swaorvski Innovations. It features gorgeous color combinations in an array of peacock type hues that are especially on trend in the cooler months.

With the cooler Fall weather in the air, it’s been exciting looking forward to all of the new activities Autumn has to offer. Mike, Kashi and I enjoyed one of our favorite traditions, leaf peeping! Here in Colorado there is no shortage of one of my favorites trees, Aspens. We set off early in the morning, driving up through Estes Park and on to a quintessential drive called the Peak to Peak highway. It’s absolutely gorgeous and both Kashi and I have our heads and toungs hanging out the window the whole time 😉

kashi-and-harmony-fall-hiking-2016

Hiking through the woods and seeing all of the rich golden colors, truly makes my heart soar. I always feel at home in nature and it brings more peaceful, loving energy into my heart. It inspires me in many ways and I feel refreshed and alive. It also helps me to feel more creative and I love to pour that refreshing sense of awe and gratitude into making new types of jewelry for not only myself, but gifts for my friends and family.

As we transition into the cooler months, our fashion and jewelry styles change and we begin to embrace the darker tones. With this years’ new coating from Swarovski, the Crystal Rainbow Dark 2X, is such a gorgeous blend of peacock colors, showcasing purple, green and yellow hues set on a black background. It will certainly be a new staple when making crystal jewelry designs that stand out as being unique and captivating.

6106 Pear-shaped Pendant

Swarovski Innovations Fall Winter 2017/18

The Crystal Rainbow Dark effect is almost as if Swarovski took the most popular coating, the Crystal AB and placed it on a black backdrop. It’s quite a brilliant idea and leave it to Swarovski for making it spectacular. It resembles an oil mark splashed onto a Crystal, which is very innovative and fits perfectly with the overall trend of people wanting to express themselves in novel ways and wear truly unique pieces.

Swarovski Crystals used in this jewelry project:

Swarovski 5328-6mm Xilion Bicone Beads in Crystal Rainbow Dark 2X ~ 70 Pieces

Swarovski 5040-6mm Rondelle Beads in Crystal Rainbow Dark 2X ~ 47 Pieces

Swarovski 5051-8x6mm Mini Oval Beads in Amethyst ~ 204 Pieces

Swarovski 5051-10x8mm Mini Oval Beads in Emerald ~ 4 Pieces

Swarovski 5728-12mm Scarab Beads in Amethyst ~ 4 Pieces

Swarovski 5514-8×8.5mm Pendulum Beads in Emerald ~ 8 Pieces

Swarovski 5045-6mm New Rondelle Beads in Emerald ~ 8 Pieces

Swarovski 5045-4mm New Rondelle Beads in Emerald ~ 2 Pieces

Supplies:

2  Beaded 5-1 End Bars 

TierraCast® 94-3056-18 or similar end bars

4      6mm round copper jump ring

10    2mm crimp beads

10    3mm crimp covers

1      copper lobster clasp

10”   beading wire

Instructions 

Step 1:       Cut beading wire into 5 10” pieces. Using one piece of beading wire slide on one crimp bead and crimp to the #1 loop on the beaded end bar.  Attach crimp cover.  Slide on one 5328 6mm, one 5045 6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5514 8×5.5mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5514 8×5.5mm, three 5040 6mm, one 5514 8×5.5mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5514 8×5.5mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5045 6mm, one 5328 6mm, and one 5045 4mm.  Now slide on one crimp bead and crimp to #1 loop on the other beaded end bar.  Attach crimp cover.

Step 2:       Using one piece of beading wire slide on one crimp bead and crimp to the #2 loop on the beaded end bar.  Attach crimp cover.  Slide on one 5045 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 10x8mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5728 12mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5728 12mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 10x8mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, and one 5045 6mm.  Now slide on one crimp bead and crimp to #2 loop on the other beaded end bar.  Attach crimp cover.

Step 3:       Using one piece of beading wire slide on one crimp bead and crimp to the #3 loop on the beaded end bar.  Attach crimp cover.  Slide on three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, and three 5328 6mm.  Now slide on one crimp bead and crimp to #3 loop on the other beaded end bar.  Attach crimp cover.

Step 4:       Repeat Step 3 using the #4 holes and repeat Step 2 using the #5 holes.

Step 5:       Attach 3 jump rings to create a small chain at one end of the beaded end bar.  Using one jump ring attach the lobster clasp to the other end. 

swarovski_crystal_heart_bead_5741-crystal_paradise_shine

Hope you love creating new jewelry using the Crystal Rainbow Dark 2X Effect!

Harmony and Kashi

Keep Smiling and Keep Shining!

swarovski_authorized_reseller