Now is a perfect time make new jewelry designs for your Fall outfits and with the Holidays right around the corner, it’s time to get busy creating special gifts and eye catching beauties for your festive parties.

Swarovski’s beautiful New Fall and Winter Innovations, make it easy to create stunning jewelry that is both on trend, while providing a classic distinction that no other crystal can.

Here are a few gorgeous Swarovski Crystal jewelry designs and free instructions for your designing delight!

Supplies:

4 10mm link settings “Almost Instant Jewelry” by Fire Mountain Gems #H20-3040MT

5” 20 gauge Gold Artistic Wire

1 lobster clasp

5 4mm jump rings

1 2” head pin

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Using the alcohol wipes clean each of the 10mm link settings. Using the two part epoxy, glue into each of the 10mm link settings the 4470 10mm light Colorado topaz shimmer cushion stones. Set aside to dry.

Step 2: Cut the 20 gauge wire into five 1” pieces. Using one piece of wire make a simple loop, slide on one 5810 10mm velvet brown pearl and make a simple loop. Repeat four more times and set aside.

Step 3: Using one head pin slide on one 5000 10mm light Colorado topaz shimmer bead and wire wrap to close. Set aside.

Step 4: To make bracelet: using one jump ring attach lobster clasp to one pearl component made in Step 2. Then attach to one cushion stone component made in Step 1. Repeat pattern 4 more times ending with a pearl component. Add on 4 jump rings in a chain and then add on the bead component made in Step 3.

Supplies:

2 10mm link settings “Almost Instant Jewelry” by Fire Mountain Gems #H20-3040MT

4” 20 gauge Gold Artistic Wire

2 ear wires

2 1” head pin

Swarovski crystal two-part epoxy glue

Alcohol wipes

Instructions

Step 1: Using the alcohol wipes clean each of the 10mm link settings. Using the two part epoxy, glue into each of the 10mm link settings the 4470 10mm light Colorado topaz shimmer cushion stones. Set aside to dry.

Step 2: Cut the 20 gauge wire into four 1” pieces.

Step 3: Using one piece of wire make a simple loop, slide on one 5810 10mm velvet brown pearl and make a simple loop. Repeat once more time and set aside.

Step 4: Using one piece of wire make a simple loop, slide on one 5810 5mm velvet brown pearl and make a simple loop. Repeat once more time and set aside.

Step 5: Using one head pin, slide on one 5810 3mm velvet brown pearl and make a simple loop. Repeat once more time and set aside.

Step 6: To create earring: Starting with an ear wire attach to the 10mm pearl component made in Step 3, then attach to one cushion component made in Step 1, then attach one 5mm pearl component made in Step 4, then attach one 3230 12x7mm light Colorado topaz shimmer sew on, and finally one 3mm pearl component made in Step 3.

Supplies:

1 Flora Toggle TierraCast® 94-6223-27

4¾” Flora Rings TierraCast® 94-3200-27

1 12mm Faceted Rivoli Link TierraCast® 94-3152-27

30 4mm oval jump rings

5 6mm round jump rings

12 2mm crimp beads

12 3mm crimp covers

72” beading wire

Swarovski crystal two-part epoxy glue

Alcohol wipes

Scotch tape

Instructions

Step 1: Using the alcohol wipes clean the Rivoli link. Using the two part epoxy glue in one 1122 12mm light Colorado topaz shimmer Rivoli into the link and set aside to dry for 24 hours.

Step 2: Cut the beading wire into six 12” pieces and set aside.

To Create Necklace Strands:

Step 3: Strand #1: Using one piece of wire slide on one crimp bead and one Flora Ring and crimp to close. Attach crimp cover. Slide on five 5328 4mm light Colorado topaz shimmer bicones, one 5000 8mm light Colorado topaz shimmer bead, three 5328 6mm light Colorado topaz shimmer bicones, and one 5000 8mm light Colorado topaz shimmer bead. Repeat this pattern 4 more times and end the strand with five 5328 4mm light Colorado topaz shimmer bicones. Close off the end with a piece of scotch tape.

Step 4: Strand #2: Using one piece of wire slide on one crimp bead and the same Flora Ring and crimp to close next to the first strand. Attach crimp cover. Slide on five 5328 4mm Erinite shimmer bicones and five 5328 6mm Erinite shimmer bicones. Repeat this pattern 4 more times and end the strand with five 5328 4mm Erinite shimmer bicones. Close off the end with a piece of scotch tape.

Step 5: Strand #3: Using one piece of wire slide on one crimp bead and the same Flora Ring and crimp to close next to the first strand. Attach crimp cover. Slide on five 5328 4mm black diamond shimmer bicones, one 5000 8mm black diamond shimmer bead, three 5328 6mm black diamond shimmer bicones, and one 5000 8mm black diamond shimmer bead. Repeat this pattern 4 more times and end the strand with five 5328 4mm black diamond shimmer bicones. Close off the end with a piece of scotch tape.

Step 6: Begin to make a tight braid with the three strands created in steps 3-5. When the braid is complete, slide on a crimp bead and one Flora Ring to one of the strands and crimp to close. Attach crimp cover. Repeat this step for the other two strands.

Step 7: Repeat Steps 3 – 6 to make other side of the necklace.

Step 8: Using 3 oval jump rings, attach them together to create a chain and then use this to attach one side of the Flora toggle to one of the Flora rings. Repeat this to attach the other side of the toggle.

Step 9: Using one round jump ring attach the Rivoli link made in Step 1 to the bottom Flora ring on the necklace. Using another round jump ring attach the bottom of the Rivoli link to another Flora Ring.

Step10: Using the oval jump rings make three chains with them. One with 4 rings, one with 8 rings, and one with 12 rings. On the bottom of each of these chains attach one 6106 16mm black diamond shimmer pendant. Using round jump rings, attach each chain to the bottom of the last Flora ring.

Hope you’re inspired by these beautiful designs.

Shine Extra Bright Sparkle Tribe!