Unknown's avatar

Show Your Love For Valentine’s Day With This DIY “Sparkling Love Patches” Design

Free Swarovski Crystal DIY Designs Embelishd Clothing Sparkling Love Patches Shirt

DIY Sewing Swarovski Crystal on Hearts on Sweater with “Sparkling Love Patches”

I’ll be honest, I fell hard for this one! I saw it. I loved it. I want to make it!

Really and truly I LOVE this cute idea! There is certainly a little more love in the air with Valentine’s Day right around the corner and now there can be some extra love…well…on your elbos 🙂

Below are the pictures and step-by-step instructions, but keep in mind, you can also use Swarovski Crystal Flatbacks to embellish these hearts with sparkles. You can either iron them on or use the Bejeweler  Hot Fix Tool using the 2078 Round Flatbacks with Hot Fix, or apply E6000 glue to adhere the 2058 Rhinestones with help from this time-saving, handy-dandy Krystal Katana tool.

Either way, you’ll shine this Valentine’s Day with sparkle & spirit!

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Instructions

SWAROVSKI Crystals used in this project:

Swarovski Crystal Sew-on Stones 3188 5 mm 143 pieces Crystal Paradise Shine

(Swarovski makes it easy to personalize your look by choosing your favorite color from virtually any color you can dream of)

Tools and Supplies

Supplies: Alcantara, 10x20cm red, Fusible interlining 10×20 cm, Nylon thread, transparent and 1x Sweater.

Tools: Darning needle, Felt pen, Iron, Scissors, Sewing needle and a Sheet of paper.

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Step 2

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Step 2a

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Step 3

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Step 4

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Step 5

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches with Hearts

DIY Swarovski Crystal Design Idea Sewing Crystals onto Sweater Sparkling Love Patches Instructions

STEP 1: Print and cut out the pattern for the patch and punch holes into the marked spots using a darning needle as shown in the illustrations along with this step.

STEP 2: Place the pattern over the red Alcantara fabric and cut out the heart shape and mark through the holes with the felt pen. Place the prepared red Alcantara heart over the fusible interlining and cut out the shape. Repeat this step for the other heart pattern with a different dot layout.

STEP 3: Place both the heart shaped fusible interlining and Alcantara hearts over the arms of the sweater (one on top of the other) and iron them.

STEP 4: Cut 1m nylon thread and sew the Swarovski Sew-on Stones art. 3188 5mm Crystal Paradise Shine F into the marked places on the Alcantara fabric using three stitches as depicted in the illustrations with this step. Repeat this step to cover all the marked dots on both patterns on each of the arms.

Swarovski_Crystal_Heart_Bead_5741-Light_Siam

Have a Lovely and Sparkling Valentine’s Day!

Unknown's avatar

Stand Out From The Crowd By Creating Your Own Sensational Swarovski Crystal Bangle!

DIY Swarovski Crystal Bangle Bracelet New Design and Instructions

DIY Swarovski Crystal Bangle For Beginners

It takes just one fabulous statement piece to make an entire outfit sing. Wear this ornate crystal bangle on a bare arm or over a single-color, slim-fitting sleeve. After all, less is more when it’s studded with the latest Kaputt Fancy Stones in new shimmering Crystal Scarabaeus Green.

DIY Swarovski Crystal Bangle Bracelet New Design and Instructions Banner

Below are the Swarovski Crystals used in this design project:

4922 Swarovski Crystal Kaputt Fancy Stone

Swarovski Crystal Fancy Stones 4922 28x24mm 1 piece of Crystal (please contact us for details)

4922 Swarovski Crystal Kaputt Fancy Stone Crystal Scarabaeus Green

Swarovski Crystal Fancy Stones 4922 28x24mm 2 pieces Crystal Scarabaeus Green (please contact us for details)

Settings 4923/S 3 pieces 28x24mm Gold (please contact us for details)

Metal Trimmings 55300 01/009 022081 23cm 9 Rows (2.8cm) Crystal Scarabaeus Green (please contact us for details)

Supplies & Tools

1 Bangle, Ø 7cm, Gold Buttonhole, silk, 1m, green Two part adhesive glue

Clothes Peg, Scissors, Sewing Needle, Toothpick & Tweezers

DIY Swarovski Crystal Bangle Bracelet New Design and Instructions Step 1

DIY Swarovski Crystal Bangle Bracelet New Design and Instructions Step 2

DIY Swarovski Crystal Bangle Bracelet New Design and Instructions Step 3

DIY Swarovski Crystal Bangle Bracelet New Design and Instructions Banner 2

STEP 1: Insert Swarovski Fancy Stones art. 4922 28×24 mm Crystal Scarabaeus Green into the Swarovski Settings art. 4923/S and secure by closing the prongs over the crystals with the help of tweezers. Repeat step with the other two Swarovski Fancy Stones as well.

STEP 2: Cut 1m of green buttonhole silk and sew the Swarovski Settings onto the Swarovski Metal Trimmings art. 55300 Crystal Scarabaeus Green.

STEP 3: Glue the Swarovski Metal Trimmings onto the bangle with a two part adhesive glue. Secure the ends with two clothes pin while it dries.

Swarovski_5741-Crystal_Paradise_Shine

Unknown's avatar

Here’s Your New Swarovski Crystal Necklace Design That Puts the WOW in WOWZA!

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid

Learn how to make this gorgeous, one-of-a-kind “Velvet Orchid” necklace made with the new SWAROVSKI Crystal Innovations!

Stage-manage your personal red-carpet moment with this statement necklace designed to highlight the amazing new flexible and stunning technology of Graphic Rocks!

The brilliant sparkle from this unique product and design element exclusively made by SWAROVSKI, will elevate your look in a new fresh way. I guarantee everyone will admire this piece and will want to get a closer look, maybe even “cop a feel” (wink-wink) just to experience these crystal clusters up close and personal. The soft and idyllic Orchid colors blend flawlessly with the new Crystal Iridescent Purple Pearls.

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid banner

Below are the SWAROVSKI Crystals used in this necklace design and the corresponding information listed for each one and take a look and the step-by-step instructions below.

Style, Amount, Size, Color, Color Code

Beads 5000 6pcs. 6mm Amethyst 204

Beads 5000 2pcs. 8mm Purple Velvet 277

Graphic Rocks 72035 3pcs. 89x69mm GP 10104022001 (please contact me for details)

Crystal Pearls 5810 4pcs. 8mm Crystal Iridescent Purple Pearl 943

Crystal Pearls 5810 3pcs. 8mm Crystal White Pearl 001 650

Crystal Pearls 5810 10pcs. 10mm Crystal Iridescent Purple Pearl 001 943

Crystal Pearls 5810 3pcs. 10mm Crystal White Pearl 001 650

Crystal Pearls 5810 1pc. 12mm Crystal Iridescent Purple Pearl 001 943

Crystal Pearls 5810 4pcs. 12mm Crystal White Pearl 001 650

Crystal Pearls 5810 2pcs. 14mm Crystal Iridescent Purple Pearl 001 943 (please contact me for details)

Crystal Pearls 5810 7pcs. 14mm Crystal White Pearl 001 650  (please contact me for details)

Crystal Pearls 5840 1pc. 14mm Crystal Iridescent Purple Pearl 001 943

Supplies and Tools

Supplies

Alcantara, 30x10cm, violet 2x Cord endings, 6mm, silver 2x Crimping tubes, silver Grosgrain ribbon, 1m, 18mm, violet Nylon thread, 3m, transparent Tiger tail 50cm, 0.3mm, silver and Two part adhesive glue.

Tools

Crimping pliers, Darning needle, Iron, Lighter, Scissors, Sewing needle, Side cutter, and Tape.

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 1.PNG

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 2.PNG

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 3

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 4.PNG

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 5

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 6

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 8.PNG

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid step 9.PNG

DIY Free Design and Instructions Swarovski Crystal Necklace Velvet Orchid banner 2

STEP 1: Place the Swarovski Crystal Graphic Rocks art. 72035 flowers onto the Alcantara fabric. Iron them and cut out as shown in the illustrations. Repeat 2x with others flowers.

STEP 2: Cut 1m nylon thread and sew one of the flowers to form it into a bud shape. Sew Swarovski Crystal Pearl art. 5810 14mm Crystal Iridescent Purple Pearl into this bud.

STEP 3: Cut 50cm long tiger tail, secure one end with a piece of tape. Slide on a crimping tube and art. 5810 8mm Crystal Iridescent Purple Pearl 3x. Stitch a hole into the orchid, by using a darning needle. Thread tiger tail through the flower from back side to top side. Slide on all Swarovski Crystals of material list in order as shown in the illustrations. Slide on another crimping tube and secure the end with a piece of tape.

STEP 4: Sew one Swarovski Bead art. 5000 8mm Purple Velvet and three Swarovski Beads art. 5000 6mm Amethyst into the middle of the flowers to give the flowers a 3-dimensional form.

STEP 5: Thread end of tiger tail through a cord ending and back through the crimping tube and 3 of the Swarovski Crystal Pearls. Crimp the crimping tube and cut off the extra tiger tail. Repeat for the other end of necklace.

STEP 6: Cut two 50cm long pieces of grosgrain ribbon.

STEP 7: Fold the ribbon inwards a little and secure using the nylon thread. Fold the two edges inwards again and sew them together as well. See illustrations for clarification. Repeat with the other ribbon as well. Glue the prepared ribbon ends into the cord endings.

STEP 8: Stitch the bud prepared in the second step onto one of the ribbons.

 Swarovski_5741-Crystal_Antique_Pink

Unknown's avatar

Free Swarovski Crystal “Frozen Florets” Necklace Design & Instructions!

Free Swarovski Crystal Necklace Design and Instructions

“Frozen Florets”

This sparkling statement necklace is a gorgeous piece to add to your collection or make as a beautiful handmade gift.

The newest Swarovski crystal colors: Crystal Light Chrome and Crystal Scarabaeus Green complement an extra elegance for the Holiday Season or a special occasion.

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets

SWAROVSKI CRYSTALS

Swarovski 2304 Swarovski Crystal Flatback Crystal Silver Night

2304-10 x 2.8mm 3 pieces of Swarovski Crystal Raindrop Flatbacks HotFix in Crystal Silver Night. (please contact me for details)

2304-14 x 3.9mm 6 pieces Swarovski Crystal Raindrop Flatbacks HotFix in Crystal Silver Night. (please contact me for details)

Swarovski_3210_Crystal_Light_Chrome_Oval_Sew_On_Stones

3210-16 x 11mm 2 pieces of Swarovski Crystal Light Chrome Oval Sew On Stones.

3210-24 x 17mm 1 piece of Swarovski Crystal Light Chrome Oval Sew On Stones.

3210-16 x 11mm 1 piece of Swarovski Crystal Silver Night Oval Sew On Stones. (please contact me for details)

3210-24 x 17mm 1 piece of Swarovski Crystal Silver Night Oval Sew On Stones. (please contact me for details)

Swarovski_Crystal_3230_Pearshape_Sew_on_Stone_Crystal_Silver_Night

3230-18 x 10.5mm 1 piece of Swarovski Crystal Light Chrome Oval Sew On Stones. (please contact me for details)

3230-28 x 17mm 4 pieces of Swarovski Crystal Light Chrome Oval Sew On Stones. (please contact me for details)

3230-18 x 10.5mm 3 pieces of Swarovski Crystal Silver Night Oval Sew On Stones. (please contact me for details)

3230-28 x 17mm 2 pieces of Swarovski Crystal Silver Night Oval Sew On Stones. (please contact me for details)

Swarovski_5045_Crystal_Scarabaeus_Green_Rondelle_Beads

5045-4mm 2 pieces of Swarovski Crystal Scarabaeus Green New Rondelle Beads

5045-6mm 1 piece of Swarovski Crystal Scarabaeus Green New Rondelle Beads

5045-8mm 2 pieces of Swarovski Crystal Scarabaeus Green New Rondelle Beads

Swarovski_5810_Crystal_Scarabaeus_Green_Pearl_Round_Pearls

5810-8mm 1 piece of Swarovski Crystal Scarabaeus Green Pearl

5810-10mm 1 piece of Swarovski Crystal Scarabaeus Green Pearl

67472/19 – 30mm 1 piece Crystal Silver Shade and Black Diamond Pave Pendants (please contact me for details)

67472/02 – 20mm 1 piece Crystal Silver Shade and Jet Hematite Pave Pendants (please contact me for details)

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 1

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 2

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 3

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 4

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 6 and 7

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 8

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 9

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets Step 10

DIY Free Design and Instructions Swarovski Crystal Necklace Frozen Florets

Step by Step Instructions:

STEP 1: Print and cut out the flower pattern from our illustration in this step.

STEP 2: Cut two 16x14cm long pieces of Alcantara fabric and a fusible interlining of the same size. Layer the interlining in between the Alcantara pieces and iron them.

STEP 3: Affix the flower pattern on top of Alcantara fabric piece using double sided tape and cut out the pattern.

STEP 4: Place Swarovski Flat Backs Hotfix art. 2304 14×3.9mm and 10×2.8mm Crystal Silver Night onto the Alcantara pattern and place the transfer film over the Swarovski Flat Backs Hotfix to prevent them from moving (see illustration with this step).

STEP 5: Iron on top of the transfer film and slowly remove the film to see if the Swarovski Flat Backs Hotfix crystals have adhered onto the fabric.

STEP 6: Cut one 7mm piece of chain, two 10mm pieces and one 12mm piece of chain. Insert Swarovski Bead art. 5045 6mm Crystal Scarabaeus Green onto an eye pin, turn a loop at the end and cut off excess wire. Repeat this process with the two 4mm 5045 beads.

STEP 7: Attach the chains to the beaded eye pins by opening the eye pins and attach the Swarovski Pendants to the chains using 3mm jump rings.

STEP 8: Sew the chains onto the flower pattern as shown in the illustration. Sew the remaining Swarovski Crystals on to the Alcantara fabric pattern.

STEP 9: Cut two 70cm long ribbon pieces and sew them to the back of the Alcantara flower pattern.

STEP 10: Tie a bow with the open ends of the ribbon.

Swarovski Crystal Black Heart

Keep Smiling and Keep Sparkling!

Unknown's avatar

DIY Fashionably Warm Swarovski Crystal Mittens! The Perfect Sparkling Gift To Warm Hands & Hearts!

DIY Mittens with Swarovski Crystal embellishments

Baby it’s cold outside!

The magical holiday season is in full swing, snow outside and its getting cozy inside.
It’s the perfect magic atmosphere to get creative and prepare your Christmas, Hanukkah, or New Years presents for your loved ones. Making gifts you know they will wear and love is always extra special! Here is a fun project that is both practical and beautiful for all those people in your life who like to be warm and fashionable!

Take an old knitted jumper and turn it into gorgeous mittens. It’s a combination of different DIY techniques with cutting, sewing and stitching. They are the perfect sparkling gift to warm their hands… and their heart!

DIY Mittens with Swarovski Crystal embellishments instructions

Below are the SWAROVSKI Crystals along with the supplies and tools you will need for this project. Let your creativity be your guide by incorporating your favorite colors and styles into your personalized style!

SWAROVSKI Crystals

Swarovski Crystal 3188 Light Chrome

Swarovski Crystal 3188-4mm Lochrose Sew On Stones Crystal Light Chrome 56 pieces (contact me for details)

Swarovski Crystal 3188 Crystal Scarabeaus Green

Swarovski Crystal 3188-5mm Lochrose Sew-on Stones Crystal Scarabeaus Green 24 pieces (contact me for details)

Swarovski Crystal 3188 Clear

Swarovski Crystal 3188-5mm Lochrose Sew-on Stones Clear Crystal  24 pieces

Swarovski 3259-Crystal

Swarovski Crystal 3259-12mm Heart Sew-on Stones 6 pieces of Clear Crystal.

Supplies and Tools

Supplies: 5mm Nylon thread,0.5mm, transparent, Jumper/sweater (recycle an old one)

Tools: Pencil, Scissors, Sewing machine, Sewing needle

DIY Mittens with Swarovski Crystal embellishments free instructions 1

DIY Mittens with Swarovski Crystal embellishments free instructions 2

DIY Mittens with Swarovski Crystal embellishments free instructions 3

DIY Mittens with Swarovski Crystal embellishments free instructions 3b

 DIY Mittens with Swarovski Crystal embellishments free instructions 4

Step-by-Step Instructions

STEP 1: Trace the outline of your hand on a piece of tracing paper and cut the pattern out; repeat for the other hand or just mirror the first one. Place the pattern over an old jumper or sweater and cut out the shape adding 5mm to the edge of the border. See the illustrations for clarification of this step.

STEP 2: Place the front-sides on top of each other and sew the mitten together. Turn the sewn mitten right side out. Repeat for the other mitten.

STEP 3: Sew all the Swarovski Crystals on the material list onto the mittens as depicted in our illustrations with this step.

Keep cozy creating these warm and sparkly mittens!

Swarovski Crystal Black Heart